Skip to main content
Fig. 6 | Brain Informatics

Fig. 6

From: BOARD-FTD-PACC: a graphical user interface for the synaptic and cross-frequency analysis derived from neural signals

Fig. 6

Initial setup. This section allows the user to open the signal to be analyzed in axon binary format (.abf) and displays an initial figure of the raw signal of every channel. The user can select the experiment and analysis conditions by selecting the channel, determining if the recording has stimulation (stim) or not and its number (Stim num), giving the separation or time between two stimuli (Inter stim time), and setting the amplitude (Threshold) to define trials. The user also chooses the time window (Initial and Final Time), sampling frequency (Fq) in Hertz (Hz), and trials used for the analysis. This section displays the raw signal and the trials selected by the user

Back to article page